Axletrac Alignment Tools LLC

Welcome to Axletrac Alignment Tools Inc
Made in the USA


Product Pricing - Order Online

Direct Distributor for Heavy Duty Axle Alignment Tools in the U.S., Canada and Worldwide


The proper way of how to accurately check semi trailer tandem axle alignments, according to all suspension manufacturers and semi trailer OEMs, is to use quality made heavy duty axle/wheel end extension tools.  They all agree that taking measurements to either the wheel rims or to any position inboard of the tires is little more than guesswork.  Using quality, precision made axle wheel end extenders will significantly increase the accuracy of your alignments.

The Axletrac semi trailer axle alignment tools are made of  7/32" heavy wall steel tubing and 3/4" solid steel pins, that will survive any shop environment.  There are no exposed external threads that can be damaged if dropped on concrete, yes it does happen!  Each wheel consist of two extension tubes that have internal threads on one end that attach to the hub piloted wheel studs and one span bar that is inserted into the two extension tubes.

The inserted pins are 3/4" by 3inches long and because of this patented design assures that the extension tubes are aligned perfectly with the studs and centeres on the axle end asssuring a precise alignment.  The design is what makes our tools so accurate.  Don't wasste your time and money on any tool that won't perform accurately and last a lifetime. 
 
Axletrac Alignment Tools Inc. has delivered precise, durable axle alignment solutions to trailer manufactureres, trailer repair shops and the trucking industry throughout the U.S. and Canada for more than ten years.  Weighing in at 18 lbs. for the AT1125-1 (single axle wheel end extender kit) we believe that our axle end extender kits are basically indestructible.  Therefore we offer a 3 year warranty against any defects not caused by excessive abuse on our axle end extenders.   

                                $459.95

                                $899.95


Because the sight line from the kingpin to the axle end extenders may be obstructed by fuel tanks, tool boxes, landing gear, trailer frames, etc. A trailer kingpin extension/pogo stick is used to transfer the kingpin to a position closer to the floor below any obstructions. A 50’ steel tape measure, preferably with 1/16th graduations is used to measure from the trailer kingpin extension tool.


In keeping with our belief of manufacturing heavy duty, high quality axle alignment equipment, our trailer kingpin extension/pogo stick weighs 8.5lbs twice as much as any other similar tools on the market.    

                                                               $449.95

Find Out More About This Patented Heavy Duty Semi-Trailer 

Axle/Wheel Alignment System and The Many Options That We Offer!

Our Best Seller ATHD-200

Complete Kit Includes:

AT1125-2, HDKPX2000, TM2000

Purchase this set and Save More

$1369.95

Order online CLICK HERE or CALL US 812 406-8552

Axletrac Alignment Tool System


All shop managers know the importance of owning quality, durable tools. The Axletrac alignment tools are precision manufactured, kept simple in design, and made of heavy wall steel.

The patented Axletrac tools, part of a heavy-duty truck and semi-trailer alignment system, simply screw onto the wheel studs of the hub. Since there is never a need to remove hubcaps, tire inflation systems, or hubodometers when checking alignments, you can save a lot of time and money!

To find out more information, give us a call today!
Contact Us
Share by: